10 Reviews: Best Wood Stain and Sealer for Fence (Sep 2023)

With no dilution or thinning required, the Ready Seal is available in eight colors and may be applied with a paint sprayer. The stain leaves no streaks, drips, or runs when applied with a brush or roller. The stain’s 48–72 hour cure time is its main downside. The oil-based mixture, suitable for both softwoods and hardwoods, works as both a stain and a sealer, saving time and money. It’s better for the environment because of the biodegradable formula, but it’s even better for your money because of the inexpensive cost.

"Went on super easy and is goof proof. This is the cedar color on cedar. Out classes other stains by far."

by Amazon Customer

Seal-Once Marine Premium Wood Sealer employs nanoparticle technology to permeate wood and protect it from within. Rather than building a top-layer barrier that can crack from moisture evaporation. This fence stain is suited for usage near fresh or saltwater. Seal-Once preserves vertical surfaces like fencing for up to ten years, however, you should check the moisture barrier every year. Apply the second coat of the water-based product within an hour of the first.

"Easy to clean up. Does the job as described. Very happy with the results."

by Bruce Tassan

This 12-ounce container of fence stain is perfect for touching up damaged or faded fence sections without buying a bucket. The little spray can is excellent for simple repairs and comes in five colors. Therefore, customers may match their fence and yard. Semi-transparent wood stain contains a sealer to protect the wood from rain, sleet, snow, and UV rays. It’s easy to apply with the spray nozzle and dries in 15 minutes, but it takes 24 hours to cure.

"We replaced a few slats on our fence. The fence was previously stained so I was searching for a match. This worked great and was easy to use."

by L. Thomas

When staining new fence boards, look for a product that includes a sealer to prevent mold, mildew, fungus, and rot from forming on the wood. This Story System stain provides UV radiation resistance as well as fading, drying, and fracture prevention for the wood. This stain and sealer are designed to work with any type of wood, including pressure-treated wood and wood substrate. Therefore, it may be used on any sort of fence. Despite the fact that it comes in five colors, it is only semi-transparent.

"We love our fence. Thanks to this. It made it look new. It's not done yet but it's looking good."

by RheaNova

When it comes to UV protection and waterproofing, Olympic Stain has it both ways. A fence is well-protected and attractive with this stain and sealer. The water-based stain, which is best suited for hardwoods, is available in eight shades and can be applied in clear, translucent, semi-transparent, or solid forms. Using this low-cost stain and sealant, you may get the look you want no matter what color scheme you want.

"Works as expected, used it before: looks good after applied on redwood, water seals as stated. I'm happy with it."

by neworder

In order to extend the life of the fence, Cabot Australian Timber Oil Stain utilizes the natural moisture-repelling properties of linseed oil, tung oil, and long-oil alkyds. Colors in Australian Timber Oil are enriched by trans-oxide pigments, which are three to four times more UV-protective than those in synthetic pigments. In order to provide long-lasting color and protection for your yard, use this specialist mixture on tough hardwoods like oak, ash, and maple.

"Good coverage and lasts several years on wearing surfaces"

by Joan Campbell

SaverSystems’ stain and sealer combination is available in five semi-transparent wood hues and offers active mold and mildew protection. When using the #1 Deck Premium Semi-Transparent Wood Stain, you don’t have to wait long between washing and staining because its weather-ready solution can be applied to damp wood. Protects the wood from moisture and UV damage with an economical stain and sealant that is resistant to peeling, fading, and deterioration.

"Worked great, was better to apply with brush than a roller, more controlled. Looks awesome."

by Jeff Wasco

Redwood and cedar fence stains are the only color options; nevertheless, this fence stain is a standout since it provides up to five years of UV protection as well as long-lasting mold, moisture, and rot prevention. Fence and furniture can be protected for up to 10 years when using this product. Because the gallon of semi-transparent fence stain is suited for low temperatures, users don’t have to wait for warmer weather to seal a wood fence against the outdoors. The drying time is around 24 hours, and the final cure time is up to 72 hours.

"Very happy with finishing. Would use again."

by Dee

The ability to choose the color of the fence makes it less of a chore to keep it in good working order. Using one of seven color options, you may protect your fence while giving your yard a new look. With a sealant built-in to help guard against rain, sleet, and snow, this water-based stain is available in 1- and 5-gallon volumes. To help protect the wood for up to three years, this fence stain contains zinc nano-particles that bounce UV light away from it.

"Tried several and this is the best. Satin finish looks great. Water beading up."

by Bulldog

The Woodrich Timber Oil Deep Penetrating Wood Stain covers 150 square feet. DIY homeowners or contractors can easily apply this stain. It’s perfect for new cedar or pressure-treated pine decks, fences, siding, or log cabins. First-timers might expect ideal outcomes. It won’t overlap, run, or leave drip marks because it saturates dry wood deeply. It can be applied to new wood and contains trans-oxide pigments for better coverage than paraffinic stains. This easy-to-use tool gives beginners a gorgeous wood finish.

"Very easy to apply. Good color."

by Jon Harkleroad