10 Reviews: Best Electric Sander for DIY Projects (Apr 2024)

The 3′′ X 4′′ Electric Ray from SurfPrep is a powerhouse with three speeds (4,000, 7,000 & 9,000 RPM). Its brushless outer-runner motor uses larger magnets to provide more torque while using less energy than inner-runner motors. The computer board of the gadget is totally sealed against contamination by a unique rubberized seal. The patented spindle bearing fan extends the life of the motor and bearings by maintaining them at a lower temperature. When compared to pneumatic sanders, electric Ray Sanders save a lot of energy and include two override protection systems to extend the tool’s life.

This battery-powered cordless detail sander eliminates the trouble and tripping danger of a power cable by running for up to 60 minutes on a single charge. The sander’s compact profile helps it to reach into tight corners and difficult angles, but if the area is still too tight, just connect the detail sanding attachment, which is roughly the width of an average adult finger. This detail sander includes a built-in dust collecting mechanism beneath the battery to assist keep the work area clean. When the dust collecting chamber is full, it may be swiftly removed, emptied, and replaced, allowing users to resume their work. This gadget is powered by a 20-volt battery and can sand at a continuous rate of 12,000 opm.

Love the mouse...this replaced an electric one that I have had for 18 years. I love the light weight and versatility of this sander. This is taller than the electric mouse which is a bit limiting on some projects. This is a must have. I have an orbital sander but I need this this one for small areas.

by LCSCHEX

This low-cost detail sander is an excellent choice for completing little woodworking jobs for the inexperienced DIYer. The WEN detail sander weighs under 2 pounds and has a 1-amp motor that produces a steady output of 13,500 opm. The corded detail sander’s tiny size and narrow profile enable it to reach into tight corners and edges, making rapid work of baseboards and trim. It has a dust collecting port built-in and fan-assisted dust slots to keep the material free when sanding.

This thing is awesome. I was restaining my railings and after the first day of sanding by hand I ordered this little guy online and am so happy I did. It would have taken me 20 times longer to sand everything without it. I e been using it on several projects around our new house and haven't had any problems with it.

by Rebecca

Connect the power wire to this low-cost multifunction detail sander and obtain up to 13,500 opm from the 1.2-amp motor. The corded detail sander has a single speed that it rapidly achieves after activating the dust-sealed on/off switch, but the vibrations created by the sander are muted by the soft rubber grip and cushioned construction. This insulation decreases hand fatigue and aids in the prevention of muscular strain caused by vibration. The 2.5-pound detail sander comes with three detail sanding attachments and a large triangular sanding pad. A tiny triangle for sanding corners, a slender sanding strip for working in tight places, and a rounded or curved attachment for contoured surfaces, such as the little supports typically used to hold the backrest of wooden chairs, are among the attachments available. It also includes a micro-filtration system to aid in dust collection when sanding.

The array of attachments included with this tool make it one of the most versatile of every hand sander I've ever tried. The attachment to sand rounded objects is clever in design and unique to this tool... I've never seen it implemented on any other brand. Quality and workmanship is excellent. I highly recommend this tool.

by Dave Mc

The BLACK & DECKER detail sander has an integrated dust collecting system that collects dust as it is formed to keep the work area clean and visible. This simple improvement eliminates the need for users to stop sanding and clean up the material before restarting. The micro-filtration mechanism of the instrument also prevents microscopic dust particles from escaping. When the collecting chamber is full, just detach it from the detail sander, dump it into a rubbish can, and reconnect it to resume work. This 2.4-pound corded detail sander boasts a 1.2-amp motor and a small design that is great for working in confined spaces. If the area remains too tight, use the accompanying detail sanding attachment, which is tiny enough to sand between the bars on the back of a chair.

Great product for the price. I had one that was just about like it that lasted for more years than I can remember so I bought this one hoping it lasts as long. I have used it to sand down two cars and two trucks before I painted them and it worked great so even if kicked the bucket today I feel for the money I spent for it, it was a good purchase.

by Amazon Customer

This small Genesis detail sander is an excellent choice for fine, accurate sanding. It weighs just 1.8 pounds and has a tiny profile that allows the sander to reach tight corners, operate inside narrow gaps, and easily sand unusual angles to produce a clean and equal surface over the whole woodworking job. Because the 1-amp corded detail sander works at 14,000 rpm and lacks a variable speed trigger, it quickly achieves full speed when switched on. It comes with three pieces of sandpaper: an 80-grit, a 120-grit, and a 240-grit piece, allowing customers to start working as soon as they plug the sander into a power outlet.

Did not know what I was going to get for this inexpensive sander ,But was surprised when I used this little sander . Great little sander is my favorite tool in my wood shop. Will buy again if this one ever gives up! Love it

by Edward A. French

The DEWALT Random Orbit Sander has a 3-Amp motor that spins pads at up to 12,000 orbits per minute, giving surfaces a clean finish. To assist prevent vibration and hand strain, the DeWalt includes a rubber over-mold and counterbalance construction. The palm sander has a small design that allows users to be closer to their workspace. It also protects against dust in two ways: first, with a dust-sealed switch for longer switch life, and second, with a vacuum locking system that can collect dust with the connected bag or link directly to other vacuums. The DeWalt is an excellent sanding tool for wood, plastic, and metal.

I purchased this product as a luxury of ease for the Hook-and-Loop replacement of the sanding pads. The sander is very powerful and robust. Remember to allow the sander to reach max speed before starting to sand. Starting this sander with the abrasive on your project (If sanding wood) will produce/cause scratch marks on the item and you more work….nuff said. Purchase with confidence

by Abe Froman

The Bosch Palm Sander sands rapidly and reliably. The Bosch’s 2.5-Amp motor and varied speed settings make it simple to sand a variety of surfaces rapidly for a well-blended finish. The Bosch’s soft-grip design provides little vibration, which helps to prevent hand fatigue. Bosch’s unique hook and loop technology allow pads to be attached as easily as Velcro and includes one sanding pad.

I love this tool. When I found out that there’s a palm sander with an adjustable speed, I looked for it right away on Amazon and found this unit. I used it all day yesterday as we were re-staining the deck and replaced the hand rails. My wrists were fine unlike that time when I used my husband’s palm sander (not sure what brand it is). I highly recommend it.

by Ethel Thrift

The PORTER-CABLE is a palm sander that can handle even the most difficult applications. The palm sander is powered by a 2-amp motor that spins at 13,500 orbits per minute to give items a smooth surface. The Porter-dust-sealed Cable’s switch adds to its longevity by keeping dust out of the primary switch for a longer switch life. The Porter-Cable has a square shape that allows users to reach into tight areas and provides less forceful material removal than RO sanders.

I use a separate sander for each sand paper grit. I had two Porter Cable 380 sanders and two other brands. After many hours of sanding I realized the Porter Cable 380 sanders were much faster than the two other sanders, so I bought two more Porter Cable 380s and discarded the others.

by MikeManassas

The BLACK+DECKER Random Orbit Sander is a champion of palm sanders since it is affordable, tiny, and powerful. Random orbital motion is used by the BLACK+DECKER to rapidly and effectively remove paint and corrosion, as well as smooth up rougher surfaces. The lightweight palm sander weighs just 3 pounds and has a chord length of 6’5′′, allowing it to be used almost anyplace. The BLACK+DECKER 120-volt paint, stain, and varnish remover are great for removing paint, stain, and varnish from wood, metal, and plastic. It may also be used to finish tasks or shape wood.

I loved this sander. I always find Black & Decker products to be reliable and just what I am looking for, and this sander was no exception. I needed it to cleanup scratched and stained bathroom countertops in my home. I required a product that wouldn’t overpower me, and that I wouldn’t be afraid to use. It was a nice size, easy to use and accomplished the job with great results.

by 2LZ